Silicone and polyurethane are commonly used materials for making molds. Both materials have their own advantages and disadvantages, and the materials suitable for casting are also different. For the p……
Jun 08, 20220
Tin-cured silicone rubber is a common raw material for making silicone molds, the default colors of manufacturers are white and translucent, many people are not clear which is better when buying.……
Dec 21, 20210
Since some liquid silicone rubbers have high viscosity and will produce bubbles when used, it is considered to add silicone oil to dilute the silicone raw materials.……
Dec 20, 20210
Vacuum forming and low-pressure forming are common processes in prototype processing. The principles of the two seem to be similar on the surface, but in fact there are certain differences.……
Dec 19, 20210
When we use silicone rubber raw materials, we often hear the words curing agent and catalyst. Many people tend to confuse these two words. Here is an analysis of the role of curing agents and catalyst……
Dec 18, 20210
The high-temperature resistance and low shrinkage of the addition silicone rubber cannot be replaced by the condensation silicone rubber. ……
Dec 15, 20210
People who use platinum-cured silicone rubber often encounter the phenomenon of not curing or contact surface is not cured sticky, a reply obtained by inquiring is caused by platinum catalyst poisonin……
Dec 14, 20210
The diversification of the hardness of the mold silicone raw materials has made many users at a loss. They don't know which silicone hardness to choose.……
Dec 11, 20210
The hardness of mold making silicone is usually determined when the silicone manufacturer produces the raw material, and the hardness is fixed after the user uses the liquid silicone raw material mold……
Dec 10, 20210
The curing of RTV-2 liquid silicone raw material is influenced by the product itself in addition to factors, the biggest influencing factor is the temperature. Let's share the effect of temperature o……
Dec 03, 20210